Video Output - Silvercrest SL 80/2 100CI Operation And Safety Notes

TV standard
The TV standard should be set according to the country where the set will be
used. You can select from PAL, NTSC, Secam or Auto.
Press the arrow keys left (10) or right (11) to change the setting.
or
Press the "OK" key (14). A selection window appears.
Select the desired setting by using the arrow keys up (12) or down (13).
Confirm your selection by pressing the "OK" key (14).

Video output

The video output signal depends on the type of cabling by means of which
you have connected the receiver to your TV set (refer to Connection
description).
Press the arrow keys left (10) or right (11) to change the setting.
or
Press the "OK" key (14). A selection window appears.
Select the desired setting by using the arrow keys up (12) or down (13).
Confirm your selection by pressing the "OK" key (14).
Explanations for the individual connection options are given below:
Connection with the SCART cable
You can select the RGB or CVBS setting according to the TV set. The RGB
setting is the most used signal and delivers the best reproduction through the
SCART connection.
Connection with a YUV cable:
Set the output signal to YPbPr, if you have connected the receiver and the TV
set with a YUV cable.
- 55 -