9-14 Upgrading Your Server
7.
Slide the hard disk drive bay in the depth of the server only a little to remove the bay.
IMPORTANT:
any components on the mother board.
8.
Place the hard disk drive bay on a flat and rigid place carefully.
9.
Hold the hard disk drive with the connector side facing toward you and the board side
facing downward and then insert the hard disk drive into the slot slowly and gently.
Place the hard disk drive so that it is put on the craws (4) of the hard disk drive bay.
When installing SCSI hard disk drive
Be careful not to have the hard disk drive bay hit on
Connector side
Face down the component side