Pci Board - NEC Express5800 User Manual

9-20 Upgrading Your Server

PCI Board

The server is equipped with five slots for installing PCI boards.
IMPORTANT:
Any PCI board is easily affected by static electricity. Handle a PCI
board after making your body contact with a metallic frame section
of the server to discharge the static electricity on your body. Do not
make bare hands contact with terminals and components on the PCI
board. In addition, do not put the PCI board on a desk directly. See
"Static Precautions" in this chapter for details of the static
electricity.
The long-sized board (full-length board) can be installed only to the
PCI slots #3 or #4. Care must be taken to avoid damage to the
components on the mother board when installing the long-sized
board.
PCI slot #1 (PCI Express)
PCI slot #2 (PCI Express)
PCI slot #3 (32-bit/33 MHz)
PCI slot #4 (32-bit/33 MHz)
NOTE:
connector matches with the shape of the PCI board slot connector.
To install the PCI board, make sure the shape of the board
Mother board