Updating The System - Applying Service Pack - NEC Express5800 User Manual

E-14 Installing Windows Server 2003

Updating the System - Applying Service Pack -

Ensure that Service Pack 1 is applied and update the system.
The necessary drivers for NEC Express5800 will be applied by updating the system.
IMPORTANT:
adding or removing hardware or Operating system software
components) or repair the system, you must run the system update
again.
NOTE:
This device requires Service Pack 1 or later.
If you install Windows Server 2003 CD-ROM which contains Service
Pack 1 to your system, you do not have to apply Service Pack 1 again.
1.
Logon to the system using the administrator account or other account which is a member
of the Administrators group.
If you use Windows Server 2003 CD-ROM which includes Service Pack 1, go on the step
4.
2.
If you use Service Pack 1 that downloaded from Web site, copy Service Pack 1 to the
voluntary directory of your system.
Put the downloaded modules into the voluntary directory.
If you have Microsoft Service Pack 1 CD-ROM, go on the step 3.
NOTE:
stands. (ex. C:\temp)
3.
Apply the Service Pack.
When you use Microsoft Service Pack 1 CD-ROM:
Insert Service Pack 1 CD-ROM into the DVD-ROM drive pressing SHIFT key.
Then double-click WINDOWSSERVER2003-KB889101-SP1-X86-ENU.EXE.
When you use Service Pack 1 that downloaded from Web-site:
Double-click <voluntary directory (ex. c:\temp)>:\WINDOWSSERVER2003-KB889101-
SP1-X86-ENU.EXE.
Continue performing tasks according to the messages.
The installation of Service Pack 1 will be started.
When Service Pack 1 has been installed, the [Windows Server 2003 Service Pack 1 Setup
Wizard] screen will be displayed.
Click on [Finish] to restart the system.
If you change the configuration of the system (by
Without applying Service Pack is not supported.
Put the downloaded modules into the voluntary directory as it