Upgrade Installation - NEC Express5800 User Manual

Upgrade Installation

Procedures below upgrade the installed Windows 2000 to Windows Server 2003 R2.
IMPORTANT:
Windows Server 2003 R2 from Windows Server 2003.
Please refer to [About the upgrade to Windows Server 2003 R2] for
details.
1.
Power on the system and start Windows 2000.
2.
Log on as an administrator.
3.
Insert the Windows Server 2003 CD-ROM into the DVD-ROM drive.
Then, [Select an operation] dialog will appear.
NOTE:
\SETUP.EXE from DVD-ROM drive.
4.
Select [Install Windows Server 2003].
Then, a dialog box asks to select the upgrade or clear installation.
5.
Select "Upgrade (recommended)" and click the Next.
Follow the messages and continue. The system will automatically restart after copying the
files.
NOTE:
ROM drive.
6.
If the SCSI controller is installed in the system, press F6 while a message, "Setup is
inspecting your computer's hardware configuration...", is on the screen.
IMPORTANT:
been pressed.
7.
When the following message is displayed, press S.
Setup could not determine the type of one or more mass storage devices
installed in your system, or you have chosen to manually specify an adapter.
Currently, Setup will load support for the following mass storage devices.
The following message is displayed.
Please insert the disk labeled
manufacturer-supplied hardware support disk
into Drive A:
*Press ENTER when ready.
It is not the procedure of upgrade installation to
If the [Select an operation] dialog box does not appear, start
You can leave the Windows Server 2003 CD-ROM in DVD-
There is no visible indication on screen when F6 has
Installing Windows Server 2003 E-9