Installing Scsi Controller Driver (N8103-75; Installing Scsi Controller Driver (N8103-95 - NEC Express5800 User Manual

F-16 Installing Windows 2000

Installing SCSI Controller Driver (N8103-75)

If you utilize SCSI controller driver (N8103-75), install it according to the following procedure:
1.
Start [Device Manager] from [Start] menu → [Control Panel] → [Administrative Tools]
→ [Computer Management].
2.
Double-click the SCSI Controller driver which Device Manager lists as unknown device.
3.
Click [Update Driver].
4.
When the "Update Device Driver Wizard" appears, select "Install from a list or specific
location [Advanced]" and click [Next].
5.
Select "Don't search. I will choose the driver to install" and click [Next].
6.
Click [Have Disk..].
– When the floppy disk drive is installed.
Insert "Windows 2000 OEM-DISK for NEC EXPRESSBUILDER" into the floppy
disk drive, enter "a:\" into "copy manufacturer's file from:" and click [OK].
– When the floppy disk drive is not installed.
Insert the NEC EXPRESSBUILDER CD-ROM into the DVD-ROM drive, enter
"<DVD-ROM drive Letter>:\WINNT\OEMFD\W2K\FD1" into "copy
manufacturer's file from:" and click [OK].
7.
Specify the [Adaptec SCSI Card 29320ALP -Ultra320 SCSI ] and click [Next].
The installation of the driver is completed.
Restart the system according to the message appeared on the screen.

Installing SCSI Controller Driver (N8103-95)

If you utilize SCSI controller driver (N8103-95), update your system with NEC
EXPRESSBUILDER CD-ROM attached to your system.
The SCSI controller driver will be installed automatically.