NEC Express5800 User Manual page 282

E-10 Installing Windows Server 2003
8.
Insert the Windows Server 2003 OEM-DISK for EXPRESSBUILDER into the floppy
disk drive, and press Enter. A list of SCSI adapters will be displayed.
9.
If the optional board is installed, select the proper SCSI Adapter and press Enter.
– Adaptec Ultra160 SCSI Cards (Win Server 2003)
(When N8103-95 board is installed.)
Continue performing tasks according to the subsequent messages that appear.
10.
When the following message is shown, press Enter to start "Welcome to Setup".
11.
When the installation of Windows Server 2003 has finished, the system reboots
automatically.
12.
When Windows Server 2003 R2 has been installed, the [Windows Setup] screen will be
displayed after logged on to the system.
IMPORTANT:
In this case, the [Windows setup] screen may not be displayed.
Be sure to install Microsoft Windows Server 2003 R2 DISC 2
according to the following procedures.
You can install Microsoft Windows Server 2003 R2 DISC 2 after
the application of "System update".
Be sure to install Microsoft Windows Server 2003 R2 DISC 2.
In this case, note that the [Windows setup] screen is not displayed.