NEC Express5800 User Manual page 80

4-18 Configuring Your Server
I/O Device Configuration
The screen shown below appears if you select "I/O Device Configuration" on the Advanced menu.
See the table below for the items.
IMPORTANT:
overlapped with others. If the value set for the interrupt or base I/O
address is used in another resource, the yellow asterisk (*) appears.
Reset any item with the yellow asterisk properly.
Option
Serial Port A
Base I/O Address
Interrupt
Serial Port B
Parallel Port
Mode
Base I/O address
Interrupt
PS/2 Mouse
Note that the interrupt and/or base I/O address are not
Parameter Description
Disabled Selects whether serial port A is
enabled or disabled.
[Enabled]
[3F8/IRQ4] Selects the base I/O address for serial
port A.
2F8/IRQ3
3E8/IRQ4
2E8/IRQ3
IRQ 3 Selects the interrupt for a serial port A.
[IRQ 4]
Disabled Selects whether serial port B is
enabled or disabled (display only).
[Enabled]
Disabled Selects whether the parallel port is
enabled or disabled.
[Enabled]
[Bi-directional] Selects the operation mode of the
parallel port.
EPP
ECP
[378] Selects the base I/O address for
parallel port.
278
IRQ5 Selects the interrupt for parallel port.
[IRQ7]
Disabled If disabled, PS/2 mouse port will not
function.
[Enabled]
Your Setting