Programme Information; Selecting Audio Channels; Adjusting The Volume; Selecting Channels - Silvercrest SSR 1080 B2 User Manual And Service Information

Programme Information

When you power up or switch to a different channel, an information window about the current programme appears:

Programme preset

Channel name

Time

Scrambled/unscrambled

Locked/not locked

Subtitles available/not available

Teletext available / not available

Dolby Digital/AC3 sound available/not available

Title of the current programme

Progress bar for current programme

Title of the next programme

Signal found/no signal
The amount and detail of the information displayed depends on the channel provider. For example, some channels do not broadcast any detailed
programme information. You can display the information window at any time by pressing the INFO button (36). Press the EXIT button (24) to close the
information window.
Note: If you cannot access a specific channel, a group or favourite list is probably active. To access all channels again, proceed as follows: Press the
OK/ENTER button (25) to open the programme list. Next, press the [Red] button (39), select the "All TV" or "All Radio" group and press the
OK/ENTER button (25) to confirm. Press the EXIT button (24) to quit the group list.

Selecting Audio Channels

Some programmes are broadcast with multiple audio channels. These audio channels can be different audio languages or different radio channels. To
select an audio channel or a language, press the AUDIO button (39). Use the  or  navigation buttons (26) to select the option you want from the
list, press OK/ENTER (25) to confirm and then press EXIT (24) to close the list.
You can also use the  or  navigation buttons (26) to choose the left or the right audio channel. The default is Stereo sound. To be able to play
Dolby Digital/AC3 sound, your TV set needs a specific decoder or you can connect your satellite receiver to an AC3-compatible amplifier.

Adjusting the Volume

To adjust the volume, press the  or  navigation buttons (26). To disable the sound immediately, press the MUTE button (17). To restore the sound,
press the MUTE button (17) again or press the  or  navigation buttons (26).

Selecting Channels

With channel numbers constantly increasing, it is difficult to maintain an overview. Many channels target specific regional audiences (e.g. foreign
language), other channels are scrambled and can only be viewed by paying a subscription and others may not interest you. There are different
channel groups and sorting criteria which allow you to organise the numerous channels available into Channel Lists. Channels can be accessed in
different ways:

Using the Numeric Buttons

If you know the programme preset where the channel you want has been stored in the Channel List, you can recall it directly by entering it using the
numeric buttons (20). After a few seconds, the satellite receiver will show the channel you want. TIP: Press the RECALL button (21) to open a list with
the 10 most recent channels selected. You can press the RECALL button (21) twice to toggle between the current and the most recent channel.

Using the Channel List

Press the OK/ENTER button (25) to open the Program List. You can highlight the channel you want using the  or  navigation buttons (26). Press
the OK/ENTER button (25) to switch to the highlighted channel. Press the PREV (29) and NEXT (28) buttons to scroll through the list faster. Groups are
a really easy way of accessing a specific channel When you open the TV or Radio Channel List, you can use the [Red] button (39) to select the
different groups. Groups allow you to filter the channel list by the following criteria: "Satellite", "Favorite", "Provider" and "Scramble". If you select the
"All TV" or "All Radio" group, all saved channels will be displayed again (no filter is applied). The group currently selected is shown in the first line of
the channel list. Press the [Green] button (38) to sort the selected channel list as follows: "Numeric", "Alphabet" and "FTA to CAS" (unscrambled first,
then scrambled). Press the FAV button (37) to open the list of your favourite channels. Press the  or  (26) navigation buttons to move between the
different lists. To locate a specific channel quickly, you can press the FIND button (30) to open a search box. Press the navigation buttons (26) on the
remote control to select the letters of the channel you are looking for and then press OK/ENTER (25) to apply the characters selected.
The left window will only show the channels matching the character sequence entered. You can use the [Red] button (39) to delete the entire entry or
Satellite Receiver SSR 1080 B2
English - 32