Mitsubishi Electric GOT1000 Series Handbook page 160

1. CONNECTION CONFIGURATION
Available module
CPU series
MELSEC-Q series (A mode)
MELSEC-A series
Motion controller CPU
(A series)
*5 Communications via the RS-485 interface cannot be executed. A0J2-C214-S1 cannot be used.
*6 Either CH1 or CH2 can be used.
*7 When connecting to A1SHCPU, A2SCPU (S1), A2SHCPU (S1), A1SJHCPU, A0J2HCP, A171SHCPU (N), or
A172SHCPU, use the computer link module with the software version U or later.
*8 Not available for GT SoftGOT1000.
*9 The module operates in the device range of the AnACPU. (The R device is not available.)
*10 Available only for GT SoftGOT1000.
Precautions
Precautions on system
Connect a terminating resistor (330 , 1/4W (orange, orange, brown,
module/computer link module.
The GOT has a built-in terminating resistor.
The motion controller (A series) cannot be connected to the remote I/O station.
Precautions on setup
When connecting GT11 to A series computer link module
When connecting the GT11 to the A series computer link module via the RS-232 communication, set the
buffer memory for the module without checking the CD signal.
Related Manuals
• For details of system configuration and connection
cable
• For precautions and restrictions
• For outlined procedure and checking of computer
link connection
• For controllers that can be monitored by GOT and
accessible range
• For connection method with Handy GOT
• For connection method with GT SoftGOT1000
• For controllers that can be monitored by GT
SoftGOT1000 and accessible range
* For restrictions and precautions on controllers connected to a GOT, refer to the manual for each controller.
142
4.1 MITSUBISHI Programmable Controller
4.1.5 Computer link connection
Serial communication module/Computer link module
Model
A1SJ71UC24-R2
A1SJ71UC24-R4 *8
AJ71UC24
*6*7
AJ71C24-S8
*10
A1SJ71UC24-R2 *7
A1SJ71UC24-R4
*7*8
A1SJ71C24-R2 *7*9
A1SJ71C24-R4
*7*8*9
A1SCPUC24-R2 *7
A2CCPUC24
*6
CH1
RS-232
RS-422/485
RS-232
RS-232
RS-232
RS-422/485
RS-232
RS-422/485
RS-232
RS-232
)) to the serial communication
Chapter 4 in GOT1000 Series Connection Manual (SH-
080532ENG)
Chapter 2 in GT Designer2 Version2 Screen Design
Manual (For GOT1000 Series) (SH-080530ENG)
Chapter 10 in Handy GOT User's Manual
(JY997D20101)
Chapter 2 in GT SoftGOT1000 Version2 Operating
Manual (SH-080602ENG)
Chapter 2 in GT Designer2 Version2 Screen Design
Manual (For GOT1000 Series) (SH-080530ENG)
*5
CH2
-
-
RS-422/485
RS-422
-
-
-
-
-
RS-422/485