Mitsubishi Electric GOT1000 Series Handbook page 198

Ethernet connection
System configuration
Target device
MELDAS
C6/C64
Ethernet
.......
10BASE-T cable
100BASE-TX cable
Extension
unit
*1:
Use a cable that supports an Ethernet module and Ethernet
board/card to be used.
*2:
For available Ethernet boards/cards, refer to the following page.
*3: The number of total GT SoftGOT 1000 running in personal computer
Connectable models
Series
MELDAS C6/C64
Available Ethernet board/card for GT SoftGOT1000
Manufacturer
3Com Corporation
-
Available module for MELDAS C6/C64 connection
Series
MELDAS C6/C64
180
4.2 Other MITSUBISHI controllers
4.2.4 CNC (MELDAS C6/C64) connection
cable Communication unit
Not required
Built in GOT
Ethernet
GT15-J71E71-100
Not required
Built in personal
computer
Commercially-available
Ethernet board
Programmable
controller CPU
is included.
Model
FCA C6
FCA C64
Model
EthernetLink LAN PC Card
Ethernet board included in personal
computer as standard
FCU6-EX875
DOS/V GT SoftGOT1000
personal
License key for
computer
GT SoftGOT1000
GOT
PC CPU
module
GT SoftGOT1000
+
License key for
GT SoftGOT1000
*4: When connecting GT16 to an equipment that meets the
10BASE (-T/2/5) standard, use the switching hub and operate in an
environment where 10Mbps and 100Mbps can be mixed.
Connection type
Ethernet connection
GT16/GT15 GT11
Ethernet board/card
Ethernet board
Ethernet module
GOT
GT16
GT15
Max. number
of personal
computers
connected
128
(16 units or less
are recommended.)
Max. connection
+
distance
Max. segment length
100 m
Max. number
of personal
computers
connected
128
(16 units or less
are recommended.)
Max. connection
distance
Max. segment length
100 m
GT SoftGOT1000
Remarks