Yamatake Temperature Controller - Mitsubishi Electric GOT1000 Series Handbook

4.6.6 YAMATAKE temperature controller

For details of the system configuration, refer to "Connection type" in section 4.6.1.
Connectable GOT
Connectable models
Model
SDC20/21
SDC30/31
SDC40A/40B/40G
SDC
SDC15
SDC25/26
SDC35/36
DMC DMC10
*1 When the RS-485 interface of the temperature controller is used, use the RS-232/RS-485 converter.
The GOT model to be used differs depending on the connection type.
Series
RS-232 or RS-422 connections
GT11 Bus connection
Handy GOT RS-232 or RS-422 connections
Precautions
Precautions on system
When connecting a GOT to the YAMATAKE temperature controller, connect a terminating resistor for the
temperature controller.
For the GOT, set a terminating resistor with the DIP switches of the RS-422/485 serial communication
unit.
Clock setting of GOT
The temperature controller does not have the clock function. Even though [Adjust] or [Broadcast] is set for
the clock setting, the setting is invalid (not processed).
236
4.6 Temperature Controller
4.6.6 YAMATAKE temperature controller
GT16/GT15
RS-485 RS-422
(4-wire
type)
(4-wire
type)
(4-wire
type)
(2-wire
type)
(2-wire
type)
(2-wire
type)
(2-wire
type)
Connection type
GT115
GT115
GT115
RS-232 RS-485
(4-wire
*1
type)
(4-wire
*1
type)
(4-wire
*1
type)
*1
*1
*1
*1
GOT model to be used
-Q BD
-Q BDQ, GT115 -Q BDA
HS-Q BD
GT11
RS-422 RS-232
*1
*1
*1
*1
*1
*1
*1