Mitsubishi Electric GOT1000 Series Handbook page 251

Precautions
Precautions on system
When connecting a GOT to the CHINO controller, set a terminating resistor for the controller.
For the GOT, set a terminating resistor with the DIP switches of the RS-422/485 serial communication
unit.
Set the GOT terminating resistor setting to on.
Clock setting of GOT
The controller does not have the clock function. Even though [Adjust] or [Broadcast] is set for the clock
setting, the setting is invalid (not processed).
Other precautions
Setting station No. of controller
Make sure that the controller corresponding to the station No. set for the host address exists in the system
configuration.
Related Manuals
• For details of system configuration and
connection cable
• For precautions and restrictions
• For outlined procedure and checking of the
CHINO controller connection
• For controllers that can be monitored by GOT and
accessible range
• For connection method with Handy GOT
* For restrictions and precautions on controllers connected to a GOT, refer to the manual for each controller.
Chapter 32 in GOT1000 Series Connection Manual
(SH-080532ENG)
Chapter 2 in GT Designer2 Version2 Screen Design
Manual (For GOT1000 Series) (SH-080530ENG)
Chapter 30 in Handy GOT User's Manual
(JY997D20101)
4.6 Temperature Controller
4.6.4 CHINO controller
1
2
3
4
5
6
7
233