Installation - Mitsubishi Electric GOT1000 Series Handbook

1.4 Installation

Panel cut dimensions
When GOT is installed
Screen size Type of GOT main unit
GT1695
15"
GT1595
GT1685
12.1"
*1
GT1585
*2
10.4" GT157
8.4" GT156
*3
GT155
*3
5.7" GT115
GT105
4.5" GT1030
3.7" GT1020
When CF card extension unit (mounting unit on control panel) is installed
Type A
GT15-CFEX-C08SET 94.0
Product installation interval
The GOT must have the clearances from other devices as shown in [Fig. A]. The GOT may require more distance than the dimensions shown in
the table depending on the types of connection cables. Consider the connector dimensions and radius of cable bending curvature when designing
the installation.
GT16/GT15
Item
GOT only
When bus connection unit is installed
When serial communication unit is installed
When RS-422 conversion unit is installed
When Ethernet communication unit is installed
When CC-Link communication unit
(GT15-J61BT13) is installed
When CC-link IE controller network
communication unit is installed
When MELSECNET/H communication unit
(coaxial) is installed
When MELSECNET/H communication unit
(optical) is installed
A
When printer unit is installed
When multimedia unit is installed
When video input unit GT16M-V4
is installed
GT15V-75V4
When RGB input unit GT16M-R2
is installed
GT15V-75R1
When video/RGB input unit GT16M-V4R1
is installed GT15V-75V4R1
When RGB output unit
GT16M-ROUT
is installed GT15V-75ROUT
When CF card unit is installed
When CF card extension unit is installed
When audio output unit is installed
When external input/output unit is installed
B
(When CF card is not used)
C
(When CF card is used)
D
E
*1 : The distance varies depending on the cable to be used. For details, consult the closest Mitsubishi Electric System & Service office.
The values in the table are given for your reference.
*2 : The distances required when the coaxial cable 3C-2V (JIS C 3501) is used.
*3 : The distance varies depending on the cable to be used. When the bending radius of the cable is larger than the indicated value, keep a space appropriate to the bending radius.
GT11
GOT main unit A, D B
GT1155 50 or more 80 or more*
GT1150 (20 or more) (20 or more)
*1 : 50 or more (20 or more) in the case of vertical installation
*2 : 80 or more (20 or more) in the case of vertical installation
GT10
GOT main unit A B
50 or more 80 or more
GT105
(20 or more) (20 or more)
GT1030 50 or more 50 or more
1
GT1020 (20 or more* ) (20 or more)
*1 : 50 or more when an RS-232/USB conversion adapter is used.
*2 : 80 or more when a personal computer connection cable is used or when a personal computer RS-232
interface is used for connecting multiple GOTs.
50 or more when an RS-232 interface is used for using an RS-232/USB conversion adapter.
*3 : 80 or more when using a USB cable or a memory board.
Dimensions shown in parentheses apply when there are no devices nearby (contactor, etc.) which produce radiated noise or heat. Even with these dimensions, however, the ambient temperature must
never exceed 55 C.
Depending on the unit and cable being used, a cable length longer than dimension A (or dimension D for the GT10) in above [Fig. A] may be required.
A B
383.5 282.5
302 228
289 200
227 176
153 121
137 66
105 66
Cautions when installing and uninstalling
B
When installing the CF card extension unit on the control panel, make sure that the extension unit does not interfere with the extension unit
33.0
cable or the CF card interface of the GOT. Place the CF card extension unit at a distance of 25mm or more from the GOT.
For installation locations, see the GT15 User's Manual.
GT1695 GT1685
50 or more (20 or more)
50 or more 51 or more
–
50 or more (20 or more)
50 or more 50 or more
(20 or more) (24 or more)
50 or more (20 or more)
50 or more (20 or more)
50 or more (20 or more)
–
50 or more (20 or more)
–
50 or more (20 or more)
–
50 or more (20 or more)
–
50 or more (20 or more)
(Unit: mm)
C
E
When CF card When CF card
is not used is used
1 2
50 or more* 100 or more
100 or more
(20 or more) (20 or more)
(Unit: mm)
C D E
50 or more 50 or more 100 or more
3
(20 or more) (20 or more) (20 or more* )
50 or more 80 or more
50 or more
2
(20 or more) (20 or more* )
(Unit: mm)
*1 : Same dimensions as A985GOT(-V)
*2 : Same dimensions as A975/970GOT(-B)
*3 : Same dimensions as F940GOT
*4 : For the GT1030 and GT1020, the tolerance
is +1/0.
For compatibility with GOT900 series,
see ''3.2 Precaution for Use''.
GT1595 GT1585 GT157
50 or more
(31 or more)
50 or more 51 or more 68 or more
50 or more (20 or more)
50 or more (20 or more)
50 or more 50 or more 50 or more
(20 or more) (24 or more) (38 or more)
1
50 or more (20 or more)*
50 or more
(31 or more)
–
–
50 or more (20 or more)*
–
50 or more (20 or more)*
–
50 or more (20 or more)*
–
50 or more (20 or more)*
50 or more
(31 or more)
80 or more (20 or more)
50 or more (20 or more)
50 or more (20 or more)
50 or more (20 or more)
100 or more (20 or more)
[Fig. A]
E
Other device
or control panel
Thickness:
2 to 4mm
+2
*4
A
0
+2
Panel opening B
0
(Unit: mm)
GT156 GT155
50 or more
65 or more
(36 or more)
73 or more –
50 or more
(40 or more)
50 or more
(32 or more)
50 or more 72 or more
50 or more
50 or more
(36 or more)
2
–
3
–
3
–
3
–
50 or more
65 or more
(36 or more)
100 or more
B
C D
A

1.4 Installation

1
*4 2
3
4
5
6
7
17