Mitsubishi Electric GOT1000 Series Handbook page 178

1. CONNECTION CONFIGURATION
Precautions
Precautions on system
AJ65BT-G4 cannot be connected to a GOT.
Precautions on setup
Setting [Network parameters] of GX Developer
• When [Mode] of the CC-Link module is set to [Remote net (Ver.2 mode)], [Remote station points] can
be set. The [Remote station points] setting is a setting for the remote I/O station. For a GOT, use the
default value (32 points).
• Set the station information setting to [Ver.1 Intelligent device station] when [Mode] of the CC-Link
module is set to [Remote net (Ver.2 mode)] or [Remote net(Additional mode)].
Other precautions
When connecting to motion controller CPU (Q series)
• For Q172CPU or Q173CPU
Use the motion controller CPU with the following production numbers.
Q172CPU with N******* or later, Q173CPU with M******* or later
• For Q172CPU, Q173CPU, Q172CPUN, or Q173CPUN
For using the SV13, SV22, and SV43, use a motion controller with the following OS installed.
SW6RN-SV13Q
For connecting the GOT to the multiple CPU system (Q00CPU, Q01CPU, Q02CPU, Q02HCPU,
Q06HCPU, Q12HCPU, and Q25HCPU), use CPUs with the function version B or later.
For connecting the GOT to the Q17nDCPU, CNC C70, and CRnQ-700, set the system to the CC-Link
network system Ver.2.
Related Manuals
• For details of system configuration and
connection cable
• For precautions and restrictions
• For outlined procedure and checking of CC-Link
connection
• For controllers that can be monitored by GOT and
accessible range
• For connection method with Handy GOT
* For restrictions and precautions on controllers connected to a GOT, refer to the manual for each controller.
160
4.1 MITSUBISHI Programmable Controller
4.1.10 CC-Link connection (via G4)
: 00H or later, SW6RN-SV22Q : 00H or later, SW6RN-SV43Q
Chapter 9 in GOT1000 Series Connection Manual (SH-
080532ENG)
Chapter 2 in GT Designer2 Version2 Screen Design
Manual (For GOT1000 Series) (SH-080530ENG)
Chapter 10 in Handy GOT User's Manual
(JY997D20101)
: 00B or later