Printer Connection - Mitsubishi Electric GOT1000 Series Handbook

4.7.6 Printer connection

System configuration
Target device
*1
Printer
Precautions
Other precautions
Connecting or disconnecting USB cable during printing
When the USB cable is disconnected during printing, some printers hang depending on the PictBridge
compatible printer model.
In this case, turn on the main power of the printer again and reboot the printer.
When printer is disabled
During initialization at power-on of a PictBridge compatible printer, some models of the printers notify a
GOT that the printer is enabled.
For the printer models, when printing is started with the GOT, an error may occur in the printer, resulting in
printing failures.
When printing is disabled, restart the printer with the following procedure.
1) Disconnect the USB cable from the printer.
2) Turn off the printer.
3) Disconnect the power cable of the printer and completely stop the printer.
4) Connect the power cable to the printer.
5) Turn on the printer and wait until initialization on the printer is completed.
6) Connect the USB cable to the printer.
Related Manuals
• For details of system configuration and
connection cable
• For precautions and restrictions
• For outlined procedure and checking of printer
connection
* For restrictions and precautions on controllers connected to a GOT, refer to the manual for each controller.
250
4.7 Other Devices
4.7.6 Printer connection
cable
USB
GT09-C30USB-5P
*1: Use a printer compatible with PictBridge.
Option unit
Printer
GT15-PRN
A printer, which is not compatible with PictBridge, cannot be used.
Chapter 46 in GOT1000 Series Connection Manual
(SH-080532ENG)
GOT
GT16/GT15