Mitsubishi Electric GOT1000 Series Handbook page 290

1. GLOSSARY
Item
Communication unit
Device
Coaxial cable
Coaxial bus system
Bus connection
Fiber-optic cable
Optical loop system
Bit device
Parts
Flash memory
Project (file)
Base screen
Base unit
Master station
Memory card
Motion controller CPU
List editor
Remote I/O station
Report screen
Local station
Word device
272
Extension unit to be installed on the extension interfaces of the GOT for
communicating with controllers, including a programmable controller CPU
Generic term for the memories equipped in the programmable controller CPU
The device is for storing data or ON/OFF signal used for sequence programs.
One of the electrical cables
The cable is covered with an insulator and the covered cable is shielded for effectively
transmitting high-frequency signals.
Network configuration using the MELSECNET/10 coaxial cable connection
The system is called "Coaxial bus system" since the bus type connection is used.
A bus is a transmission path that enables a programmable controller CPU to
communicate with the other modules. The bus connection is that the GOT is
connected to the bus.
Cable for transmitting optical signals
The programmable controller is activated by an electrical signal. The electrical signal
of ON/OFF is converted to the optical signal to send the optical signal via a fiber-optic
cable. When receiving the signal, the signal is converted to the electrical signal.
Network configuration using the MELSECNET/10 fiber-optic cable connection
The system is called "Optical loop system" since the loop (ring) type connection is
used.
One of the devices of the programmable controller
The device that transmits information by one bit
Figures registered as parts
Parts are used for the parts display and parts movement.
Figures that can be registered as parts include character and image data.
Memory that stored data are not deleted without energization
A group of all the information to be displayed on a GOT
A project consists of the screen information, parts information, and others. The
information (project) is created as one file.
The basic screen for the GOT screen display
Module where a programmable controller CPU module, power supply module, I/O
module, or intelligent function module is installed
A programmable controller CPU station where a master module controlling the CC-
Link system and data link is installed
Screen data can be stored in a memory card with a GOT, and the data can be used
with the other GOTs. The memory card includes the CF card.
A CPU module that enables the positioning control of multiple axes easier and with
high-speed and high-accuracy
The processing load is distributed by assigning the complicated servo control to the
motion CPU module and other machine and information controls to the
programmable controller CPU module.
Function for changing a sequence program in the list program format (instruction
word) with the GOT
Programs can be edited on the scene immediately.
One of the remote I/O network system stations
The remote I/O station is a station at the remote side that sends and receives signals
with controllers at the machine side by the command from the master station in a
remote place.
Screen for creating formats to be output with the report function
One of the CC-Link system stations
The local station is a programmable controller CPU station with a local module is
installed.
One of the devices of the programmable controller
The device that transmits information by 16 bits (word).
The GOT can treat the word device with 16 bits or 32 bits.
Description