Mitsubishi Electric GOT1000 Series Handbook page 32

GT10
General specifications
Item
Display
Operating ambient
temperature
Other than display
Storage ambient temperature
*1
Operating ambient humidity
*1
Storage ambient humidity
Conforming
to JIS B 3502
Vibration resistance
and
IEC 61131-2
Conforming to JIS B 3502 and IEC 61131-2 (147m/s
Impact resistance
Free from oil mist, corrosive gases, flammable gases and excessive conductive dusts or direct sun beams (The same applies to unit storage.)
Operating atmosphere
*2
Operating altitude
Installation location
*3
Overvoltage category
*4
Contamination level
Cooling method
Grounding
Performance specifications<GT105 >
Item
GT1055-QSBD
Type STN color LCD
Screen size
Resolution
Display size 115(W) 86(H) [mm] (in horizontal display mode)
No. of displayed 16-dot standard font: 20 chars. 15 lines (2-byte),
characters 12-dot standard font: 26 chars. 20 lines (2-byte) (in horizontal display mode)
Display colors
256 colors
Display *1
Right/left: 55 , Up: 65 , Down: 70
View angle
(in horizontal display mode)
Contrast adjustment
Intensity 380 [cd/m
*2
Life (Time for display contrast reaches 20% at operating ambient temperature of 25 C)
Cold-cathode fluorescent tube (not replaceable) with backlight OFF detection function.
Backlight
Backlight off time and screen save time can be set.
Approx. 75,000 hours or more
Life
(Time for display intensity reaches 50% at operating ambient temperature of 25 C) Guarantee one year
Type
No. of touch keys
Touch
Key size
panel
No. of simultaneous
touch points
Life 1,000,000 times or more (operating force 0.98N or less)
*3
User memory Built-in flash ROM for saving project data (3 MB or less) and OS
Memory
Life (No. of writings)
Backed up data Clock data, alarm history and recipe data
Battery
Approx. 5 years (operating ambient temperature: 25 C)
Life
Guaranteed life: within one year after date of manufacture
Transmission speed: 115200/57600/38400/19200/9600/4800bps
RS-422
Connector shape: D-sub 9-pin (female)
Application: Communication with PLCs
Transmission speed: 115200/57600/38400/19200/9600/4800bps
Connector shape: D-sub 9-pin (male)
RS-232
Application: Communication with PLCs, connection with barcode readers,
Built-in
communication with personal computers
interface
(project data upload/download, OS installation, transparent function)
USB (full-speed 12Mbps), device 1ch
Connector shape: TYPE Mini-B (receptacle)
USB
Application: Communication with personal computer
(project data upload/download, OS installation, transparent function)
Memory board
For installing memory board (GT10-50FMB) 1ch
Buzzer output Single tone (tone length adjustable/none)
Protective construction *4 Conforming to IP67f (JEM1030) (front panel)
External dimensions
Panel cut dimensions
Weight
Applicable software package GT Designer2 Version 2.90U or later
*1 : On LCD screens, bright dots (permanently lit) and black dots (not to be lit) generally appear. Because the
large number of display elements exist on an LCD screen, it is not possible to reduce appearance of the
bright and black dots to zero.
Flickering may occur depending on the display colors.
Note that the existence of bright and black dots is a standard characteristic of LCD screens, and it does not
mean that the products are defective or damaged.
*2 : Using the GOT screen save/backlight OFF functions prevents screen burn-in and extends the backlight life.
*3 : The memory is a ROM that permits overwriting of new data without having to delete the existing data.
*4 : This does not guarantee protection in all users' environments. The specification is not applied when the
interface protective cover and rear face protective cover are removed.
14
1.2 Specification
Specification
*5
0 C to 50 C
0 C to 55 C (horizontal installation), 0 C to 50 C (vertical installation)
-20 C to 60 C
10 to 90%RH, no condensation
10 to 90%RH, no condensation
Frequency Acceleration
5 to 9Hz –
Under intermittent
vibration
9 to 150Hz 9.8m/s
5 to 9Hz –
Under continuous
vibration 9 to 150Hz 4.9m/s
2
, 3 times in each of X, Y and Z directions)
2000m or less
In control panel *6
or lower
2 or less
Self-cooling
Type D grounding (100 or less). Connect to panel if unable to ground.
Specification
GT1050-QBBD
STN monochrome (blue/white) LCD
5.7"
QVGA: 320 240 [dots]
Monochrome (blue/white) 16 gray scale
Right/left: 45 , Up: 20 , Down: 40
(in horizontal display mode)
16-step adjustment
2 2
] 260 [cd/m ]
Approx. 50,000 hours
Guarantee one year
Approx. 54,000 hours or more
Matrix resistive type
Max. 50 keys/screen
Min. 16 16 [dots] (per key)
Max. 2 points
100,000 times
GT11-50BAT type lithium battery
RS-422, 1ch,
RS-232, 1ch,
164(W) 135 (H) 56 (D)[mm]
153(W) 121(H)[mm]
0.7kg (excl. mounting brackets)
*1 : Water bulb temperature for STN display type must be 39 C or lower.
*2 : Do not operate or store the GOT unit in pressurized environments
where the pressure exceeds the 0m elevation atmospheric
*5
pressure, as this could result in abnormal operation.
*3 : Assuming that the device is connected at some point between a
public power distribution network and local system equipment.
Category
fixed equipment. The surge withstand voltage is 2500V for devices
Half amplitude Sweep count with ratings up to 300V.
*4 : Index that indicates the level of foreign conductive matter in the
3.5mm
10 times in
operating environment of device. Contamination level 2 denotes
2
–
each of X,
contamination by non-conductive matter only, though momentary
1.75mm Y and Z
conductivity may occur due to occasional condensation.
directions
*5 : 0 to 40 C for GT115 HS
2
–
*6 : Excluding GT115 HS
*7 : The 5VDC type requires no grounding.
*7
Power supply specifications<GT105 >
Item
GT1055-QSBD
Input power supply voltage
Input frequency
Input maximum apparent power
Power consumption 9.84W or less (410mA/24VDC)
With backlight off
Inrush current
Permissible instantaneous failure time
Noise resistance
Withstand voltage 500VAC for 1 minute between power supply terminal and ground
Insulation resistance 10M or higher with an insulation resistance tester (500VDC between power supply terminal and ground)
Applicable wire size
Clamp terminal Clamp terminals for M3 screw RAV1.25-3, V2-N3A, FV2-N3A
Tightening torque (terminal
block's terminal screws)
*1 : Excluding GT115 HS
applies to devices that are supplied with power from
Specification
GT1050-QBBD
24VDC (+10%, -15%), ripple voltage of 200mV or less
–
–
9.36W or less (390mA/24VDC)
4.32W or less (180mA/24VDC)
15A or less (26.4V) 2ms
Within 5ms
Noise voltage 1000Vp-p, noise width 1µs
by noise simulator with noise frequency 30 to 100Hz
2
*1
0.75 to 2 [mm ]
*1
0.5 to 0.8 [N·m]
*1