Table of Contents
Advertisement
Error Messages and Warning Messages
Item number
Display
3B
NO LTC REPRODUCED
45
DT UNLOCKED
50
PROCESSOR IS IN TEST MODE
55
VIDEO PLL UNLOCKED
59
INPUT AUDIO DATA MISMATCH 32.000K
5A
INPUT AUDIO DATA MISMATCH 47.056K
61
TELEFILE MEMORY IS FULL
62
NO AREA FOR TELEFILE DATA ADDITION There is no space at all in the Tele-File.
63
INVALID FORMAT TELEFILE
64
TELEFILE DATA WRITE FAIL
65
NO TELEFILE LABEL
66
TELEFILE DATA WRITE IS INHIBITED Recording or editing was started with the Tele-File in overall write
67
TELEFILE DATA READ FAIL
71
INVALID FORMAT CONVERSION
A-8
Appendix
Meaning
LTC signal not detected on the tape.
DT cannot be correctly traced during playback, recording, or editing.
The processor is in test mode.
Video lock generator PLL not locked to the video reference signal.
The input audio frequency is wrong.
The input audio frequency is wrong.
The remaining capacity of the Tele-File is low, and therefore the next
recording will overwrite old data.
Parts of the Tele-File format are wrong.
A write to Tele-File error occurred.
The Tele-File could not be recognized, and therefore the cassette is
ejected (HDCAM-SR only).
inhibit mode.
A Tele-File read error occurred.
The settings do not allow format conversion.
Advertisement
Table of Contents
