Items Relating To Prerolling (401 - Sony SRW-5001 Operation Manual

Items Relating to Prerolling (401~)

Item number Item
401 FUNCTION MODE
AFTER CUE-UP
403 CUEUP BY TC
404 CUEUP BY CTL
405 CUE MENU
DEFAULT MODE
select
406 CUE MENU
PREROLL
OFFSET
407 AUTO REWIND
Setting
Function
[stop]
Selects the operation mode that the VTR changes to after
still
completing a cue up operation.
stop: Enters stop mode.
still: Enters still-picture mode (search mode).
Note
When setting the standard constant on the editor and
control the unit, set to "stop."
capstan only This setting is only active when item 602 is set to TC or
[reel/capstan] UBIT.
capstan only: The tape runs with the pinch ON during cue
reel/capstan: The tape runs with the pinch OFF state during
[capstan only] This setting is only active when item 602 is set to CTL.
reel/capstan capstan only: The tape runs with the pinch ON state during
reel/capstan: The tape runs with the pinch OFF state during
When this unit is controlled by an editor (BVE-2000/BVE-
9100, etc), and the setting is "reel/capstan", cue up
operations are done at high speed.
Select "capstan only" when editing precision has priority.
[page mode]
Selects the default mode when the CUE menu is opened.
extend mode page mode: PAGE mode
extend mode: EXTEND mode
[0 sec] Sets the preroll time for a cueing up operation from the CUE
. . .
menu.
30 sec
[off]
Selects the rewind mode for the end of the tape.
on off: The tape transport stops at the end of the tape.
on: The tape is automatically rewound from the end of the
up. (The maximum tape speed is ten times normal tape
speed.)
cue up. When the tape nears the cue up point and tape
speed drops to slow, the pinch turns ON.
cue up. (The maximum tape speed is ten times normal
tape speed.)
cue up. When the tape nears the cue up point and tape
speed drops to slow, the pinch turns ON.
tape.
A-25
Appendix