Sony SRW-5001 Operation Manual page 181

Item number Item
937
CRISP
THRESHOLD
(DC)
938
LEVEL DEPEND
THRESHOLD (DC)
939 H DETAIL
FREQUENCY (DC)
940 H/V RATIO (DC)
941 GAMMA (DC)
942 GAMMA LEVEL
(DC)
943 CROSS COLOR
CRISP (DC)
950 CONVERTER
MODE (UC)
951 H CROP
POSITION (UC)
952 LETTER BOX
POSITION (UC)
953 UP CONVERTER
PROCESS
Setting Function
[0]
Adjustment of the down converter image enhancer, and
. . .
setting an amplitude so that low amplitude signals are not
15 enhanced.
0 Adjustment of the down converter image enhancer, and
. . .
setting the brightness range of enhanced contours.
[8]
. . .
FH
2.6 MHz Adjustment of the down converter image enhancer, and
setting the central frequency for enhanced contours.
3.4 MHz
[4.3 MHz]
6.7 MHz
0 Adjustment of the down converter image enhancer, and
. . .
setting the horizontal to vertical ratio for enhanced contours.
[3]
. . .
7
[on]
Activates or deactivates the GAMMA LEVEL setting.
off
128 Adjustment of the down converter image enhancer, and
. . .
setting the slope of the correction curve.
[0]
Valid only when the GAMMA LEVEL setting is activated by
. . .
the menu item 941.
–128
0 Sets the crisp level for down converter output cross color.
[4]
15
[EDGE-CROP] Selects the mode for up conversion.
LETTER BOX EDGE-CROP: Select edge-crop mode.
SQUEEZE
LETTER BOX: Select letterbox mode.
SQUEEZE: Select squeeze mode.
–120 When EDGE-CROP is selected in menu item 950, adjusts
. . .
the H crop (the frame in the horizontal direction inserted in
[0] edge-crop mode) in up-conversion output.
. . .
120
–120 When LETTER BOX is selected in menu item 950, adjusts
. . .
the position in the vertical direction of the "letterbox" in up-
conversion output.
[0]
. . .
120
FIELD Selects the original image used for conversion from SD to
HD.
FRAME
[ADAPTIVE] FIELD: Selects field images.
FRAME: Selects frame images.
ADAPTIVE-2
ADAPTIVE (standard mode): For up-conversion, the mode
ADAPTIVE-3
ADAPTIVE-2 (still image priority mode): For up-conversion,
ADAPTIVE-3 (movie priority mode): For up-conversion, the
in which the ratio of carrying out conversion from frames
or fields is set to the standard value.
the mode in which the ratio of carrying out conversion
from frames is increased.
mode in which the ratio of carrying out conversion from
fields is increased.
(Continued)
A-43
Appendix