Selecting The Output Signals (Pb/Ee); Record Inhibit Mode (Rec Inh) - Sony SRW-5001 Operation Manual

4-2 HOME Menu
4-2-1 Selecting the Output
Signals (PB/EE)
The audio/video output signals from the line output
and monitor output connectors can be temporarily
changed from their current settings to another set of
settings by pressing the [F1] (PB/EE) button. The
video, digital audio, and analog cue channel output
signals are toggled to the other set of settings while the
button is pressed.
Output Signal Selection
Output signal selection is made using the VTR SETUP
menu item 017 "PB/EE SELECT MENU". Output
signal types for different operation modes of this VTR
are shown below.
Output
Channel
VTR
Operation
Mode
Standby off
EE/EE
Standby on PB/MUTE
Playback
Record EE/EE
Shuttle 3) PB/MUTE
Jog PB/PB
Variable PB/PB
INPUT CHECK
button
1) Output signals during playback are PB/PB only. Output
signals cannot be selected with the VTR SETUP menu
item 017 "PB/EE SELECT MENU".
2) When the INPUT CHECK button is held down, the
INPUT signals (audio and video) are output. Output
signals cannot be selected with the VTR SETUP menu
item 017 "PB/EE SELECT MENU". When the INPUT
signals are output, only monitor output is changed. Line
output signals are not changed.
3) Pressing the [F1] (PB/EE) button changes the output
signals during shuttle mode in the following ways.
VTR SETUP MENU item 017
"PB/EE SELECT MENU"
settings
PB/MUTE
PB/PB
EE/EE
4-14
Chapter 4 Menu Settings
Video/Audio
PB/MUTE
EE/EE EE/MUTE
PB/PB 1)
PB/PB
EE/EE PB/PB
PB/MUTE
PB/MUTE
INPUT 2)
Output signals while the
[F1] (PB/EE) button is held
down
EE/EE
EE/EE
PB/MUTE
Note
When PB/PB is selected in shuttle mode during
HDCAM playback, audio output is muted for playback
speeds of more than –1 or +2 times normal speed.
4-2-2 Record Inhibit Mode
(REC INH)
Record inhibit mode is selected by pressing the [F2]
(REC INH) button. Every time the button is pressed,
the setting toggles between "off" and "on".
The record inhibit area is selected using the VTR
SETUP menu item 003 "REC INHIBIT AREA select".
all: All recording is prohibited. (The REC INHIBIT
indicator will be lit.)
crash REC: The normal record mode is disabled.
Use this setting when you want to record only
during assemble editing or insert editing.
video/CTL: Video and CTL signal recording is
inhibited.
Audio/CTL: Audio and CTL signal recording is
inhibited.
[casst]: This is displayed when recording is inhibited
because the record-protect plug is set. This setting
cannot be selected.
REC INHIBIT indicator