Table of Contents
Advertisement
Items Relating to Operation Panels (101~)
The values enclosed in a box are factory settings.
Item number
Item
101
SELECTION FOR
SEARCH DIAL
ENABLE
102
REFERENCE
SYSTEM ALARM
104
REC INHIBIT
LAMP FLASHING
107
JOG DIAL
RESPONSE
109
KEY INHIBIT
Setting
Function
Determines how the unit is set to search mode.
dial direct
[via search key]
dial direct: The unit enters search mode when you rotate the
via search key: The unit enters search mode when you
off
Specifies where or not to display a warning when audio/
[on]
video reference signal selected in item 005 is not present or
out of phase with the input video signal.
off: No warning is displayed.
on: Warning is displayed by flashing STOP button.
[off]
Specifies whether the REC INHIBIT indicator lights or
on
flashes, when REC inhibit plug on the back side of the
inserted cassette tape is pressed down.
off: The REC INHIBIT indicator lights up.
on: The REC INHIBIT indicator flashes.
[type1: -1 to +1]
Selects the tape speed (VTR command) characteristics for
search JOG dial rotation.
type2: –2 to + 2
TYPE1: Tape speed changes linearly in a range of –1 to +1
type3: –2 to + 2
TYPE2: Tape speed changes in a range of –2 to +2 times
TYPE3: Tape speed changes linearly in a range of –2 to +2
[off]
When this is set to ON, the "KEYINH" indicator in the OEL
on
display appears, and the editing control block, tape transport
control block, search control block, and REMOTE button are
disabled.
search dial in all modes except recording and edit
modes.
press the SHUTTLE, JOG or VAR button.
times normal tape speed.
normal tape speed as shown below in TYPE 2. (Tape
speed does not change when the search dial is within a
range of ±1 times normal tape speed.)
times normal tape speed as shown below in TYPE 3.
TYPE2
speed
FWD
+2
+1
RVS
FWD
-1
rotation
-2
RVS
TYPE3
speed
FWD
+2
RVS
FWD
rotation
-2
RVS
(Continued)
A-19
Appendix
Advertisement
Table of Contents
