Items Relating To Vtr Operations (001 - Sony SRW-5001 Operation Manual

Menu List

Items Relating to VTR Operations (001~)

Item number Item
001 PRE-READ
002 REC INHIBIT
select
003 REC INHIBIT
AREA select
005 SERVO/AV
REFERENCE
select
006 EXTERNAL
REFERENCE
select
A-14
Appendix
Setting Function
[off]
Selects the pre-read (read-before-write) mode for insert
on editing.
off: No pre-read operation
on: Pre-read operation
[off] Selects the record inhibit mode.
all/crash REC/video
off: Recording is enabled. (The REC INHIBIT indicator does
CTL/audio CTL
casst
all/crash REC/video CTL/audio CTL: Recording is inhibited
casst: When the recording protection plug on the cassette is
[all] Selects the scope to which inhibiting recording applies.
crash REC
all: All recording is inhibited. (The REC INHIBIT indicator
video/CTL
audio/CTL
crash REC: The normal recording mode is inhibited. Use this
casst
video/CTL: Recording of video and CTL is inhibited.
audio/CTL: Recording of audio and CTL is inhibited.
casst: When the recording protection plug on the cassette is
The REC INHIBIT indicator lights or flashes to indicate the
state of the recording inhibit mechanism on the cassette.
For details, see item 104.
[input]
The servo reference is determined by the following menu.
auto
input: The reference signal is obtained from the HD SDI
external
auto: During recording and in the edit preset state, the
external: The servo reference signal is always external.
[extrn HD]
When item 005 is set to external, this selects the signal used
extrn SD as reference by this unit.
extrn HD: The signal input to the REF. INPUT 1 connector is
extrn SD: The signal input to the REF. INPUT 1 connector is
not light.)
on the set channels.
The scope of inhibiting recording is determined by menu
item 003.
pushed in, this setting is displayed. This setting cannot
be selected.
lights.)
setting when you wish to record in assemble editing or
insert editing only.
pushed in, this setting is displayed. This setting cannot
be selected.
INPUT A/B connectors.
reference signal is obtained from the HD SDI INPUT A/B
connectors .
When item 001 is not set to off, the reference signal is
always external.
In all other cases, the servo operates using the signal
selected in item 006 as the reference signal. If the signal
selected in item 006 is not present, the servo operates
using an internal reference signal.
used as the reference signal for playback and audio
signal recording.
used as the reference signal for playback and audio
signal recording.
(Continued)