Sony SRW-5001 Operation Manual page 29

2 DIGITAL I/O (input/output) section
DIGITAL I/O (AES/EBU)
INPUT OUTPUT
AUDIO AUDIO
CH1/2 CH3/4 CH1/2
CH5/6 CH7/8 CH5/6
CH9/10 CH11/12 CH9/10
1 HD SDI (SDI video/audio) INPUT A/B
connectors (BNC)
These accept SDI video/audio signals.
Note
The INPUT MONITOR connectors are for use with an
input monitor and does not follow the standards for
output.
2 HD SDI (SDI video/audio) OUTPUT connectors
(BNC)
These output up to three sets of SDI video/audio
signals.
When the ALT/[F6] (CHARA SUPER) buttons are set
to ON in the TC menu, time data or other text data is
superimposed on the output signal.
3 FORMAT CONV. OUT (OPTION) connectors
(BNC)
These output two sets of format-converted video/audio
signals.
When the ALT/[F5] (PD CHARA) buttons are set to
ON in the TC menu, the output has time data or other
text superimposed on the signal.
DIGITAL I/O
HD SDI INPUT
INPUT
A MONITOR
CH3/4
B INPUT
MONITOR
B(OPTION)
CH7/8
HD SDI OUTPUT
1 2 3 MONITOR
A A A
CH11/12
B(OPTION) B(OPTION) B(OPTION)
FORMAT CONV. OUT (OPTION)
1 2
MONITOR
SD SDI OUT
1 2 MONITOR
1 HD SDI INPUT A/B connectors
2 HD SDI OUTPUT connectors
3 FORMAT CONV. OUT (OPTION) connectors
4 SD SDI OUT connectors
5 DIGITAL I/O (AES/EBU) OUTPUT connectors
6 DIGITAL I/O (AES/EBU) INPUT connectors
Note
This is only valid when the optional HKSR-5001
format converter board is installed.
4 SD SDI (1/2/monitor) OUT connectors (BNC)
These output up to three sets of video/audio signals.
When the ALT/[F6] (CHARA SUPER) buttons are set
to ON in the TC menu, time data or other text data is
superimposed on the output from the MONITOR
OUTPUT L/R connector.
5 DIGITAL I/O (AES/EBU) OUTPUT connectors
(BNC)
These output digital signals in AES/EBU format for
channels 1 to 12.
6 DIGITAL I/O (AES/EBU) INPUT connectors
(BNC)
These accept digital signals in AES/EBU format for
channels 1 to 12.
Chapter 2 Locations and Functions of Parts
2-15