Reference Signals; Reference Signals For Output Video - Sony SRW-5001 Operation Manual

3-2 Reference Signals

3-2 Reference Signals
This section describes how reference signals for the
video output are selected.

3-2-1 Reference Signals for Output Video

Depending on the operating condition, VTR SETUP
menu settings, and the input signal, the video output
signal from the VTR can be synchronized as follows.
Start
What is the setting of
ext
the VTR SETUP menu item
005 "SERVO/AV
REFERENCE select"?
auto
Is the VTR currently
recording or is EDIT
PRESENT on?
No
What is the setting of
the VTR SETUP menu item
006 "EXTERNAL REFERENCE
select"?
extrn HD
Is there a signal of the correct
frequency on the REF. INPUT
1 or 2 connector?
No
Synchronization with
the reference video
signal input to the
REF. INPUT 1 or 2
connector
3-4
Chapter 3 Setting Up the VTR
input
Yes
extrn SD
Is there a signal of the correct
Yes
frequency on the REF.
INPUT 1 or 2 connector?
No
Synchronization with
the video signal input
to the REF. INPUT 1
or 2 connector
No external synchronization (synchronization is internal)
Yes
Is there an input signal
on the HD SDI INPUT
connector?
No
Synchronization with
the video signal input
to the HD SDI INPUT
connector
Yes