Sony SRW-5001 Operation Manual page 175

Hd digital videocassette recorder format converter board digital betacam processor board rgb processor board
Table of Contents

Advertisement

Item number
Item
813
AUDIO MONITOR
OUTPUT MIXING
814
LEVEL METER
SCALE
815
AUDIO OUTPUT
PHASE
preset: 128
821
AUDIO ADVANCE
MODE
830
AUDIO INPUT
SELECT
Sub items
A-IN ALL
A-IN CH1
A-IN CH2
A-IN CH3
A-IN CH4
A-IN CH5
A-IN CH6
A-IN CH7
A-IN CH8
A-IN CH9
A-IN CH10
A-IN CH11
A-IN CH12
Setting
Function
add
Specifies the type of audio mixing to be conducted on the
[rms]
digital audio signal output to the MONITOR OUTPUT L/R
average
connector.
add: Simple addition
rms: Multiplied average
average: Simple average
Note
When the CUE channel signal is output to the monitor,
signals are mixed by simple addition.
[peak 0 dB]
Specifies the mode in which the digital audio level is
reference 0 dB
displayed.
peak 0 dB: Displays minus audio levels with the maximum
reference 0 dB: Displays plus and minus audio levels with
Note
The cue channel level is always displayed with the reference
level set at 0 dB.
0
Sets the output timing for the digital audio playback signal
. . .
(SDI and AES/EBU only). The 128 setting specifies the
[128]
reference position.
. . .
A setting lower than 128 advances the output timing, and a
setting higher than 128 delays the output timing.
255
(128 samples, or approx. 2.7 ms, with 1 sample = approx.
20 µs)
[off]
Specifies whether or not the phase of the audio output signal
is shifted 1 frame ahead of the video output signal.
on
off: The phase of the audio output signal is not shifted.
on: The phase of the audio output signal is shifted 1 frame
Note
When edit preset is set to "ON", SRW-5000 operates
internally with "off" setting.
AES/EBU
Selects the input signals for audio channels 1 to 12. This is
[SDI]
only valid when 831 NON AUDIO SELECT is set to "off".
AES/EBU: Selects signal input to DIGITAL I/O (AES/EBU)
SDI: Selects signal input to HD SDI INPUT A connector.
A-IN ALL (sub item): Sets the items A-IN CH1 to CH12 to
level set at 0 dB.
the reference level set at 0 dB.
ahead of the video output signal. Note that the phase is
shifted for all audio channels.
INPUT connector.
the same value.
(Continued)
A-37
Appendix

Advertisement

Table of Contents
loading

This manual is also suitable for:

Srw-5003Srw-5002Srw-5000

Table of Contents