Sony SRW-5001 Operation Manual page 23

5 REC INHIBIT indicator
The status of this indicator depends on the setting of
the [F2] (REC INH) button in the HOME menu and the
state of the record-protect plug on the cassette.
Setting of the [F2] State of the record-
(REC INH) button in protect plug on the
the HOME menu cassette
all Recording disabled
Recording allowed
crash REC, video/ Recording disabled
CTL, audio/CTL
Recording allowed
off Recording disabled
Recording allowed
a) Toggling between lit/flashing settings is possible using
the VTR SETUP menu item 104 "REC INHIBIT LAMP
FLASHING".
Recording, editing, and selection of assemble and
insert modes are possible only when the indicator is
off.
5 Search Control Section
REC INHIBIT
indicator
Lit/flashing a)
Lit
Lit/flashing a)
Unlit
a)
Lit/flashing
a)
Unlit
1 SHUTTLE button
Press to enter shuttle mode. In this mode, the button
lights and playback at the speed corresponding to the
angle of rotation of the search dial is possible. The
playback speed range depends on the frame frequency
of the unit. In this mode, the search dial clicks at the
positions for 0 (still picture), –10 and +10 times
normal playback speed.
Frame frequency
23.98/24 Hz
25 Hz
29.97/30 Hz
2 JOG button
Press to select jog mode. In this mode, the button
lights up and playback at –1 to +1 or –2 to +2 times
normal playback speed (determined by the setting in
the VTR SETUP menu item 107 "JOG DIAL
RESPONSE") is possible. In this mode, the search
dial does not click.
3 VAR (variable) button
Press to select variable speed playback mode for
noiseless playback in a maximum range of –1 to +2
times normal playback speed. Playback exceeding this
speed range is not possible. The search dial clicks at
the positions for still-picture and normal playback
speed.
1 SHUTTLE button
2 JOG button
3 VAR button
4 Search dial
Playback speed
Ranging from ±50
Ranging from ±48
Ranging from ±40
Chapter 2 Locations and Functions of Parts
2-9