Lan Configuration; Figure 41 - Lan Configuration Page - Motorola PTP 300 Series User Manual

7.5.2 LAN Configuration

The LAN configuration page (Figure 41) is used by the system administrator to configure the
PTP 300 Series Bridge's LAN interface.
All of the LAN Configuration attributes are non-volatile, so once set, they will be used by the
unit even after a power on reboot. The LAN Configuration page contains the following fields:
IP Address
Internet protocol (IP) address. This address is used by the family of Internet protocols to
uniquely identify this unit on a network.
Subnet Mask
A subnet allows the flow of network traffic between hosts to be segregated based on a
network configuration.
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299

Figure 41 - LAN Configuration Page

86
7 Web Page Reference