Upgrade Software Image; Figure 93 - Software Download Progress Indicator Page - Motorola PTP 300 Series User Manual

Reboot
This allows the user to reboot the unit. This option must be executed after resetting the IP &
Ethernet configuration or erasing the configuration detailed above.
Software Version
This is the software version of the recovery operating system permanently installed during
manufacture.
Recovery Reason
Indicates the reason the unit is operating in Recovery mode. Possible reasons are "Recovery
button active" or "Invalid or corrupt image"
MAC Address
The MAC address shown here is the MAC address of the unit programmed during
manufacture.
8.2

Upgrade Software Image

The first step (Figure 92) is to use the 'Browse' button to locate the software image to be
downloaded. Once located the user should press the "Upgrade Software Image" button to
start the software download process.
During software download, progress is indicated by a pair of progress bars (Figure 93).
When the download is complete a page is displayed indicating the status of the software
download (Figure 94).
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299

Figure 93 - Software Download Progress Indicator Page

155
8 Recovery Mode