Reboot After Software Upgrade; Figure 69 - Software Upgrade Complete Page; Figure 70 - Reboot Confirmation Pop Up - Motorola PTP 300 Series User Manual

7 Web Page Reference

Figure 69 - Software Upgrade Complete Page

7.8.4 Reboot After Software Upgrade

Reboot the unit by clicking the "Reboot Wireless Unit" button. You will be asked to confirm
this action as shown in Figure 70.

Figure 70 - Reboot Confirmation Pop Up

This will reboot the unit, taking up to 120 seconds. During this time you will not be able to
communicate with the unit.
If you cannot communicate with the unit after 120 seconds, this could indicate a problem with
the memory update process. Under these circumstances the user should enter "Recovery
Mode", see Section 8 "Recovery Mode".
After the reboot the user should check that the required software image is loaded and
running.
NOTE
Please ensure that you are upgrading the correct units. Units cannot be downgraded.
124
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299