Locate And Upload Software Image; Figure 67 - Software Upgrade Image Check - Motorola PTP 300 Series User Manual

The software upgrade pages are used to update a unit's operational software. The software
image to be uploaded should be downloaded to local storage from the Motorola web site. The
software image is delivered by Motorola as a compressed zip file. Once the zip file has been
downloaded, the user should extract the PTP 300 Series Software image, identifiable by its
'.dld' file extension.

7.8.1 Locate and Upload Software Image

The first step (Figure 66) is to use the "Browse" button to locate the software image
previously downloaded to local storage from the
located, the user should press the Upload Software Image button to start the software
upgrade process.
CAUTION
During the software upgrade process, ensure that the remote end is upgraded first
using the wireless connection, and then the local end can be upgraded.
The software image will now be uploaded to the unit. This upload should only take a few
seconds. Once complete the image is verified and validated to ensure that no errors occurred
during transfer and that the image is valid to run on the current platform. If there are any
problems a warning screen will appear.
The unit being upgraded will now display information about the build it currently has stored in
the image bank and the one that's just been uploaded. If the image is not the right one, the
user has the option to go back and reload a new image. (See Figure 67).
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299

Figure 67 - Software Upgrade Image Check

122
7 Web Page Reference
Motorola web site. Once the image is