Dell PowerEdge M820 Owner's Manual page 100

Error Code Message Information
Details
Action
HWC1010
Message
Action
HWC1015
Message
Details
Action
HWC2006
Message
LCD Message
Details
Action
HWC2008
Message
Details
Action
HWC2011
Message
LCD Message
Details
Action
HWC3000
Message
100
The backplane may be necessary for proper operation.
System functionality may be degraded.
If removal was unintended, check presence, then reinstall or
reconnect.
The backplane is disabled.
If disabled unexpectedly, re-enable backplane.
The mezzanine card <number> is absent.
The mezzanine card may be necessary for proper operation.
System functionality may be degraded.
If removal was unintended, check presence, then reinstall or
reconnect.
The <name> is not installed correctly.
The <name> is not installed correctly. Check connection.
The device may be necessary for proper operation. System
functionality may be degraded.
Check presence, then re-install or reconnect.
A fabric mismatch detected between IOM and mezzanine
card <number>.
The fabric type for the IOM and mezzanine cards must
match.
Check chassis fabric type in CMC GUI and compare to the
type of IOM or mezzanine card.
The riser board cable or interconnect is not connected, or is
improperly connected.
Riser board cable or interconnect failure. Check connection.
The riser blade cable may be necessary for proper operation.
System functionality may be degraded.
Check the riser board or interconnect presence, then
reinstall or reconnect.
The <name> is removed.