Dell PowerEdge M820 Owner's Manual page 133

Error Code Message Information
SEC0608
Message
Details
Action
SEC0610
Message
Details
Action
SEL0002
Message
Details
Action
SEL0006
Message
Details
Action
SEL0008
Message
Details
Action
SEL0010
Message
Details
Action
SEL0012
Message
Details
A password violation detected.
This may apply to a physical or remote access attempt.
Check system logs for intrusion attempts, and ensure strong
password policies.
An Out-of-band password violation detected.
This may apply to a remote access attempt.
Check system logs for intrusion attempts, and ensure strong
password policies.
Logging is disabled.
This message is displayed when event logging of a specific
type is disabled by the user.
If unintended, re-enable logging.
All event logging is disabled.
This message is displayed when all event logging has been
disabled by the user.
If unintended, re-enable logging.
Log is full.
When the event log is full, additional events are not written
to the log. Older events may be overwritten and lost. This
message may also appear if the user disabled event logging.
Backup and clear log.
Log is almost full.
When the event log is full, additional events are not written
to the log. Older events may be overwritten and lost.
Backup and clear log at the next maintained time.
Could not create or initialize the system event log.
If the system event log fails to initialize, platform status and
failure events are not captured. Some management software
do not report platform exceptions.
133