Dell PowerEdge M820 Owner's Manual page 109

Error Code Message Information
Details
Action
MEM7002
Message
LCD Message
Details
Action
MEM8000
Message
LCD Message
Details
Action
OSE0000
Message
Details
Action
OSE0001
Message
Details
Action
OSE0004
Message
Details
Action
The memory may not be seated correctly, misconfigured, or
has failed.
Check the memory configuration. Re-seat the memory
modules. If the issue persists, see
A hardware mismatch detected for memory riser.
Memory riser mismatch detected. Check memory riser.
Memory riser is installed incorrectly, or failed.
Check that the memory riser is installed correctly. If the issue
persists, see Getting Help.
Correctable memory error logging disabled for a memory
device at location <location>.
SBE log disabled on <location>. Re-seat memory.
Errors are being corrected but no longer logged.
Review system logs for memory exceptions. reinstall
memory at location <location>.
A critical stop occurred during OS load.
The system halted due to an exception during operating
system load or operating system initialization.
Review operating system logs and system video for
additional information.
A runtime critical stop occurred.
The system halted due to an exception while the operating
system was running. This is a kernel panic or bug check
event.
Review operating system logs and system video for
additional information.
A soft shut-down initiated by platform event filter.
A separate exception or status condition shutdown the
operating system. (IPMI sensor type 20h - offset 04h).
Review system event log for platform events capable of
shutting the system down.
Getting Help.
109