Installing A Processor/Dimm Blank - Dell PowerEdge M820 Owner's Manual
Hide thumbs
Also See for PowerEdge M820:
- Owner's manual (151 pages) ,
- Technical manual (47 pages) ,
- Reference manual (1682 pages)
Table of Contents
Advertisement
Figure 16. Removing and Installing a Processor/DIMM Blank
1.
processor socket
3.
tabs (4)
Installing A Processor/DIMM Blank
1.
Remove the blade from the enclosure.
2.
Open the blade.
3.
If installed, remove the processor and heat sink.
4.
Position the processor/DIMM blank on the system board with the holes on the tabs of the processor/
DIMM blank secured to the heat sink retention screws on the system board.
5.
Install the cooling shroud.
6.
Close the blade.
7.
Install the blade in the enclosure.
44
2.
processor/DIMM blank
4.
heat sink retention screws (4)
Advertisement
Table of Contents
Troubleshooting
