Dell PowerEdge M820 Owner's Manual page 102

Error Code Message Information
Action
HWC4015
Message
Details
Action
HWC5001
Message
Action
HWC5002
Message
Details
Action
HWC5004
Message
Details
Action
HWC5006
Message
Action
HWC5008
Message
Action
HWC5010
Message
Action
HWC5014
Message
Action
102
Check presence, reinstall or reconnect, then reattempt the
update. If the issue persists, see
Link Tuning error detected.
CMC has old firmware. After updating the firmware the CMC
will recognize the device.
Update the CMC firmware. If the issue persists, see
Help.
<name> is offline.
If unexpected, check presence, then reinstall or reconnect.
A fabric mismatch detected on <name>.
The fabric type for the IOM and mezzanine cards must
match.
Check chassis fabric type in CMC GUI and compare to the
type of IOM or mezzanine card.
A link tuning failure detected on <name>.
CMC has old firmware. After updating the firmware the CMC
will recognize the device.
Update the CMC firmware. If the issue persists, see
Help.
A failure is detected on <name>.
If the issue persists, see
Console is not available for the <name>.
If the issue persists, see
<name> cannot detect any hosts.
If the issue persists, see
<name> is not functional and is powered off.
If the issue persists, see
Getting Help.
Getting Help.
Getting Help.
Getting Help.
Getting Help.
Getting
Getting