Dell PowerEdge M820 Owner's Manual page 123

Error Code Message Information
Action
PSU0005
Message
Details
Action
PSU0006
Message
LCD Message
Details
Action
PSU0007
Message
Details
Action
PSU0008
Message
Details
Action
PSU0016
Message
LCD Message
Details
Verify the input source is attached to the power supply.
Verify the input power is within the operating requirements
for the power supply.
The power input for power supply <number> is outside of
the allowable range, but it is attached to the system.
The operating requirements for the power supply may be
found in this manual or on the power supply itself.
Verify the input power is within the operating requirements
for the power supply.
Power supply <number> type mismatch.
Power supply <number> is incorrectly configured. Check
PSU.
Power supplies should be of the same input type and power
rating.
Install matched power supplies and review proper
configuration in this manual.
Power supply <number> is operating at 110 volts, and could
cause a circuit breaker fault.
A power supply that is designed to operate at 220V, but is
connected to a 110V power source requires additional
current for operation. The additional current may trip circuit-
breakers or cause other electrical issues with the input
source.
Check input power source and cabling. Use recommended
input power. Review this Manual. If the issue persists, see
Getting Help.
Power supply <number> voltage rating does not match the
system's requirements.
The system does not support mixed voltage power supplies.
Install a power supply with the correct voltage rating.
Power supply <number> is absent.
PSU <number> is absent. Check PSU.
The supply has been removed or has failed.
123