Direct Bypassing; Remote Access; System Tests - GE Concord 4 Series Installation Instructions Manual

Direct Bypassing

(030nnn1 where nnn=user
number 00-229)
This setting determines whether a
specific user code provides access
to the "bypass sensors" feature.
Set this feature to "on" for all
users who need to be able to
bypass sensors.

Remote Access

(030nnn2 where nnn=user
number 00-229)
This setting determines whether
the user can access the panel from
a remote phone (a phone located
off the premises).

System Tests

(030nnn3 where nnn=user
number 00-229)
This setting determines whether a
specific user code provides access
to the phone and sensor tests. Set
this feature to "on" for all users
who need to be able to conduct
phone and sensor tests.
Latchkey Report
(030nnn4 where nnn=user
number 00-229)
This setting determines whether
the user code causes a latchkey
report to be sent to a pager when
the code is used to change arming
levels.
Concord 4 Series Systems
To turn user code Direct Bypassing off or on:
1. With the display showing
.
CODES
2. Press # and the display shows
3. Press A or B to select the desired user number, then press #. The display shows
nnn - nnnn.
4. Press A or B until the display shows
5. Press 1 (off) or 2 (on). The display flashes the entered setting. Press # and the display
shows the new setting.
To turn user code Remote Access off or on:
1. With the display showing
.
CODES
2. Press # and the display shows
3. Press A or B to select the desired user number, then press #. The display shows
nnn - nnnn.
4. Press B until the display shows
5. Press 1 (off) or 2 (on). The display flashes the entered setting. Press # and the display
shows the new setting.
To turn user code System Tests off or on:
1. With the display showing
.
CODES
and
2. Press # the display shows
3. Press A or B to select the desired user number, then press #. The display shows
nnn - nnnn.
4. Press A or B until the display shows
5. Press 1 (off) or 2 (on). The display flashes the entered setting. Press # and the display
shows the new setting.
User Codes-Reg. User Codes-User NNN (Defaults: 00-05 = on, 06-229 = off)
To assign the Latchkey Report attribute to user codes:
1. With the display showing
.
CODES
and
2. Press # the display shows
3. Press A or B to select the desired user number, then press #. The display shows
.
nnn - nnnn
4. Press A or B until the display shows
5. Press 1 (off) or 2 (on). The display flashes the entered setting. Press # and the display
shows the new setting.
WWW.DIYALARMFORUM.COM
User Codes-Reg. User Codes-User NNN (Default = off)
, press # and the display shows
USER CODES
nnn (first available user number).
USER
DIRECT BYPASSING OFF
User Codes-Reg. User Codes-User NNN (Default = off)
, press # and the display shows
USER CODES
nn (first available user number).
USER
/
REMOTE ACCESS ON
User Codes-Reg. User Codes-User NNN (Default = off)
, press # and the display shows
USER CODES
nnn (first available user number).
USER
SYSTEM TESTS OFF
, press # and the display shows
USER CODES
(first available user number).
USER nnn
LATCHKEY OFF/ON
REGULAR USER
/ (current setting).
ON
REGULAR USER
(current setting).
OFF
REGULAR USER
/ (current setting).
ON
REGULAR USER
(current setting).
USER
USER
USER
USER
64