Sharp IV-C35M User Manual page 135

REFIMG ARE (MDL0)
Move the cursor to " REFIMG ARE(MDL0)" and press the SET key. When the SET item is
highlighted, press the SET key again to bring up the setting screen.
When a rectangle is selected
Specify the upper left and lower right
corners of the reference image area.
When a horizontal line is selected
Specify the start and end points on the X
axis. Specify the start and end points
using the up/down/left/right arrow keys.
The points will move along the X axis
(while keeping the same Y coordinate).
Setting screen (RECTANGLE)
RECTANGLE RESET RETURN
MDL 0
1
2
3MOVE
4REFERENCE IMG
Reference image of MDL1
Detection image of MDL1
Search area of MDL1
SET=MOVE ESC=BACK SEL=CHNG IMG TRG=FUNC
Setting screen (X-LINE)
X-LINE RESET RETURN
MDL 0
1
2
3MOVE
4REFERENCE IMG
Crosshair cursor
(detection coordinate)
Solid line (reference line)
Dotted line (search line)
SET=MOVE ESC=BACK SEL=CHNG IMG TRG=FUNC
5-5
Degree of Match Inspection
RED F C1 BRT
Reference image of MDL0
Detection image of MDL0
Search area of MDL0
SERIAL NO.
8F053G26
MODEL
IV-C35M
X:224 Y:139
RED F C1 BRT
SERIAL NO.
8F053G26
MODEL
IV - C35M
X:194 Y:245
5