Sharp IV-C35M User Manual page 198

REGISTER NO.
Select register number to measure. When
making color positional measurement, you can
select any register from 0 to 7 (a total of 8
registers).
MODE
Select a mode for detection.
The details of each mode are as follows.
.
Detection Mode
NO (None)
1P-SCH
(1-point search)
2P-SCH
(2-point search)
1P-EDGE
(1-point edge)
2P-EDGE
(2-point edge)
1P-SCH + 1P-EDGE
(1-point search and
1-point edge)
REGISTER NO. ( MDL 0,
The specified modes are displayed for each register number on these lines. When a 1-point search
or 1-point edge is specified, only "
or 1-point search and 1-point edge is specified, "
The "S" in the table indicates a gray search, and the "E" indicates edge detection. "X" means not
used.
• An example of mode settings
REGISTER NO.
3MDL0
4MDL1
EXTRACT COLOR
Details
Does not detect.
Detect the positional deviation of one point in the
scanned image compared to a single reference image,
after performing a gray search.
Detect the positional deviation of two points in the
scanned image compared to two reference images,
after performing a gray search.
Detect the positional deviation of one point in the
scanned image compared to a single reference image,
after performing edge detection.
Detect the positional deviation of two points in the
scanned image compared to two reference images,
after performing edge detection.
Detect the positional deviation of two points, one point
after performing a gray search and one point after
performing edge detection.
MDL 1)
MDL 0" will be available. When a 2-point search, 2-point edge,
REGISTER0 : 2P-SCH
REGISTER1 : 1P-SCH
REGISTER2 : 1P-SCH + 1P-EDGE
REGISTER3 : 2P-EDGE
REGISTER4 : 1P-EDGE
13-3
Color Positional Measurement
MEA-CND SCREEN COND SAVE
1REGISTER NO.
00 (0 7)
2MODE
1P-SCH+1P-EDGE
REGISTER NO.
00 01 02 03 04 05 06
3MODL 0
S S
4MODL 1
E S
EXTRACT COLOR
SET=SELECT A MENU ESC=BACK SEL=CHNG IMG TRG=FUNC
MDL 1" is also available.
S Gray search
E Edge detection
No setting
COLOR F C1 BRT
07 08 09 10 11 12 13 14 15
Usable models
Model 0 only
Model 0 and 1
Model 0 only
Model 0 and 1
Model 0 and 1
13