Sharp IV-C35M User Manual page 241

Numeric calculation setting
- Press the TRG/BRT key to move the cursor to the upper function menu, and highlight "COND"
using the left and right arrow keys. Press the SET key to show the popup menu. Select "NUM-
CALC" from the popup menu.
- Select "NUM-CALC" on the menu tree.
See "Chapter 19: Numerical calculation."
Output condition setting
- Press the TRG/BRT key to move the cursor to the upper function menu, and highlight "COND"
using the left and right arrow keys. Press the SET key to display the popup menu. Select "OUT"
from the popup menu.
- Select "OUT-COND" on the menu tree.
See "Chapter 21: Setting the Input/Output Conditions."
Display the measurement results
Return to the operation screen and press the TRG/BRT key. The measurement results will be
displayed on the screen.
Maximum density difference
Maximum density
Minimum density
(TYPE00)
OK
0025ms 2002-02-04 16:13
1 INSPECT NG
REGISTER NO. 0(0 7)
SG = 007.3 OK
MXG = 243.3 OK
MNG = 231.1 OK
X0 7 Y0 7
MNU-CHG MAIN-COND CHG-MEA COND-CHG CHNG-REG SCREEN-CHG CHG-TYPE
17-7
Fault Inspection
COLOR F C1 BRT
V .
READY
17