Table of Contents
Advertisement
3. The "
SET SERIAL BLOCK" line will appear.
Select this line and press the SET key. Enter the
block No., measurement No. and camera No. of
the measurement data to be output, using the
left, right, up and down keys.
- Specify a block number to be returned in
addition to block 0 (00). If block 00 is specified,
data from block 00 will not be returned a second
time. After the settings are complete, press the
SET key.
Setting the Input/Output Conditions
OBJ-TYPE I/O
SCREEN SAVE
1TRIG CCD START
2FILTER TYPE
3CCD TRIG COND
4SHUTTER SPEED
5SERIAL OUTPUT
6SET SERIAL BLOCK
7CAM NO
8CALIBRATION
9CALIBRATION
=SELECT A MENU ESC=BACK SEL=CHNG IMG TRG=FUNC
21-27
BIN
RED
(TO NEXT SUB-MENU)
1/00060 (1/30 1/10000)
BLOCK-ASSIGN
BLOCK00 MEAS0 CAM1
1(1
MANUAL
(TO NEXT SUB-MENU)
21
Advertisement
Table of Contents
Troubleshooting
