Option - Sharp IV-C35M User Manual

Setting the Operating and System Conditions

2-5 Option

With the IV-C35M, you can initialize the measurement settings, and run a self-diagnosis from the option
menu.
2
Setting method
1) Display the "OPTION" from the "MAIN MENU."
2) Select the operation you want, such as
" INITIALIZATION" or "
INITIALIZATION
Select any of the "ALL-INIT" (initialize both FROM and RAM), "INIT-RAM" or "NG-IMG-INIT"
and the following message will appear.
MEM INIT?(YES=[SET], NO=[ESC] )
Press the SET key to start the initialization. The bar shown below will appear and display the
progress of the initialization.
REFERENCE IMG
SYSTEM I/O
OBJECT TYPE COND
After the initialization is complete, the word "INITIALIZING" will change to "COMPLETE INIT."
Press the ESC key to return to main screen.
SELF DIAGNOSIS
Select "
SET key twice. The controller will execute a
self-diagnosis and display the results of the
diagnosis, as shown right. If the diagnosis
results are normal, "OK" will be displayed. If
the results are abnormal, "NO" will be
displayed.
When the diagnosis is complete, the
"DIAGNOSING" display will change to
"COMPLETE DIAGNOSIS ."
SELF DIAGNOSIS."
INITIALIZING
SELF DIAGNOSIS" and press the
MAIN MENU
IVC35M
SYS-CND
OBJECT TYPE COND
SET WIZARD
EDIT MAIN OPS MENU
OPTION
ENVIRONMENT SETTING
MEMORY CARD
=TO NEXT SUB-MENU ESC=BACK SEL=CHNG IMG TRG=POPUP
OPTION SCREEN SAVE
1INITIALIZATION
ALL-INIT
2SELF DIAGNOSIS
EXEC
OPTION SCREEN SAVE
1INITIALIZATION
ALL-INIT
2SELF DIAGNOSIS
EXEC
DIAGNOSING
VRAM OK
SDRAM OK
TIME OK
TYPE COND OK
REFFERENCE IMG OK
BOOT-PROG OK
SYSTEM-PROG OK
SET=EXEC ESC=BACK SEL=CHNG IMG TRG=FUNC
2-20
COLOR F C1 BRT
COLOR F C1 BRT
INIT-RAM NG-IMG-INIT
COLOR F C1 BRT
INIT-RAM NG-IMG-INIT
When the diagnosis is complete, the
"DIAGNOSING" display will change to
"COMPLETE DIAGNOSIS ."