Image Pre-Processing - Sharp IV-C35M User Manual

2) Move the cursor to the "EVALUATION COND"
item on the Menu tree screen and press the
SET key.

[7] Image pre-processing

A comparative calculation between images, gray level changes, and space filter are available for image
pre-processing.
Comparative
calculation between
images
Gray level changes
Space filter
How to get to the "IMG PRE-PROC" screen
Select "OBJECT TYPE COND" and then
"TYPE00" or "TYPE(NEW)" on the "MAIN COND"
screen. Then select "MEA-CND(CAMERA1)" and
"MEAS" to open a measurement screen. At the
" MEAS SELECTION" item, press the SET key
and choose a measurement program from the
popup menu.
Note: If the " MEAS SELECTION" is set to "NO,"
the image pre-processing cannot be speci-
fied.
*: means that measurement program numbers for
which measurement conditions are not yet specified.
Press the ESC key to return to the OBJECT TYPE
COND screen. Then select "IMG PRE-PROC."
Note: If the NG image registration function is
specified, "MEA-CND(CAMERA2)" will
change to "MEA-CND(NG-IMGS)" and
Camera 2 cannot be selected.
MEA-CND(NG-IMGS)
FINAL NUM.CALC
FINAL OUTPUT COND
OBJ-TYPE I/O
OBJ-TYPE SYS.
TYPE(NEW)
Subtracting,absolute value of difference (between camera 1 and reference
image,between camera 2 and reference image, between camera 1 and camera 2)
Magnification by "n" processing,
emphasis
Smoothing (center/average),edge emphasis,edge extraction, horizontal
edge,vertical edge
6
( )
IMG PRE-PROC
MEAS CND
EVALUATION COND
DISTANCE&ANGLE COND
NUM-CALC
OUT-COND
POSI-CORRECT
MEAS(NEW)
3-29
Setting the Conditions for Each Object Type
SELECT OBJECT TYPE COND
OBJECT TYPE COND
TYPE00
TYPE RUN COND
IMAGE-ADJ
MEA-CND(CAMERA1)
MEAS0(POSI-DEVIATION F)
IMG PRE-PROC
MEAS CND
REG-COND(S)
REG-COND(E)
EVALUATION COND
DISTANCE&ANGLE COND
NUM-CALC
OUT-COND
POSI-CORRECT
MEAS(NEW)
MEA-CND(CAMERA2)
FINAL NUM.CALC
FINAL OUTPUT COND
OBJ-TYPE I/O
SET=TO NEXT SUB-MENU ESC=BACK SEL=CHNG IMG TRG=POPUP
(+/-) correction, histogram widening, midrange
MEASUREMENT 1 SCREEN COND SAVE
1COLOR MODE
COLOR FILTER
2SET COLOR FILTER (TO NEXT A MENU)
3MEAS SELECTION
POSI-DEVEATION
SELECT OBJECT TYPE COND
OBJECT TYPE COND
TYPE00
TYPE RUN COND
IMAGE-ADJ
MEA-CND(CAMERA1)
MEAS0(POSI-DEVIATION F)
IMG PRE-PROC
MEAS CND
EVALUATION COND
DISTANCE&ANGLE COND
NUM-CALC
OUT-COND
POSI-CORRECT
MEAS(NEW)
MEA-CND(CAMERA2)
FINAL NUM.CALC
FINAL OUTPUT COND
OBJ-TYPE I/O
OBJ-TYPE SYS.
TYPE(NEW)
SET=TO NEXT SUB-MENU ESC=BACK SEL=CHNG IMG TRG=POPUP
COLOR F C1 BRT
1REGISTER NO.
2CONDITION SET
3X COORD.
(BDL0)
4Y COORD.
(MDL0)
5x DEVIATE
(MDL0)
6y DEVIATE
(MDL0)
3
7MATCH LVL (MDL0)
8ANGULAR DEVIATE
9X COORD.
(MDL1)
0Y COORD.
(MDL1)
qx DEVIATE
(MDL1)
wy DEVIATE
(MDL1)
eMATCH LVL (MDL1)
rTEST
RED F C1 BRT
NO
POSI-DEVIATION
CHK-DEG-MATCH
INSPECT-LEAD
INSPECT-BGA/CSP
MEAS-BIN-OBJ
CNT-BIN-OBJ
LABEL-BIN-OBJ
POINT-MEAS
MALTI-POSI
MULTI MATCHES
INSPECT NG
COLOR F C1 BRT
1COMPARE IMGS
2COMP IMGS COND
3CHNG GRAY LEVEL
4CONTRAST MAGNI
5SPACE FILTER
6NUM.OF FILTER