Halt On Ng Measurement - Sharp IV-C35M User Manual

[5] Halt on NG measurement

You can stop all measurements when an NG image
(according to the final evaluation results) occurs while
operating the IV-C35M.
Select " HALT ON NG MEAS" on the "OBJECT
TYPE SYS." menu.
2 2 2 2 2 HALT ON NG MEAS
NO
YES
NO(NG MEAS DISP)
Shown below is an example of an NG image that occurred during measurement 1.
Wait for trigger input
Processing measurement 0, camera 1
Processing measurement 0, camera 2
Processing measurement 1
NG occurred
Processing measurement 2
Processing measurement 3
Processing measurement 4
Description
Even if an NG image (final evaluation result) is detected while
operating the IV-C35M, the system will continue making
measurements.
When an NG image is detected (according to the final
evaluation result) while operating the IV-C35M, the controller
will stop making measurements.
Even if an NG image (final evaluation result) is detected while
operating the IV-C35M, the system will continue making
measurements. But, it displays the occurred NG
measurements at first.
(Setting whether to stop measurements when an NG occurs)
3-53
Setting the Conditions for Each Object Type
OBJ-TYPE SYS. SCREEN SAVE
1REGST NG IMG
YES
2HALT ON NG MEAS
YES
3MNTR LIGHT LVL(CAM1) YES
4LIGHT LV COND
(TO NEXT SUB-BENU)
5MNTR LIGHT LVL(CAM2) YES
6LIGHT LV COND
(TO NEXT SUB-MENU)
7MOVE ALL WINDOW
(TO NEXT SUB-MENU)
"No" "Yes"
- Stops processes
of measurements 2
to 4
COLOR F C1 BRT
NO
YES
NO(NG MEAS DISP)
3