Sharp IV-C35M User Manual page 199

Color Positional Measurement
How to set the register conditions
How to enter the REG-COND setting screen
There are three methods for getting to the REG-COND setting screen.
1) On the "MEAS CND" setting screen, move
the cursor to "
press the SET key. The cursor will move into
the table. Move the cursor to the "S" or "E"
column and press the SET key.
Note: If you press the SET key in the "X"
2) On the "MEAS CND" setting screen, press
the TRG/BRT key to move the cursor to the
upper function menu. Select the "COND" item
and then select the "REG-COND(S)" or
"REG-COND(E)" item and press the SET
key.
3) On the menu tree, move the cursor to the
"MEAS CND" item, and press the right arrow
key. The sub menu which contains the "REG-
COND(S)" and "REG-COND(E)" items will
appear. Move the cursor either of them and
press the SET key.
13
MDL 0" or " MDL 1" and
column, the setting will be invalid.
MEA-CND SCREEN COND SAVE
1REGISTER NO.
00 (0 7)
2MODE
1P-SCH+1P-EDGE
REGISTER NO.
00 01
3MODL 0
S
4MODL 1
E
EXTRACT COLOR
SET=VALUE INPUT ESC=BACK SEL=CHNG IMG TRG=FUNC
SELECT OBJECT TYPE COND
OBJECT TYPE COND
TYPE00
TYPE RUN COND
IMAGE-ADJ
MEA-CND(CAMERA1)
MEAS(NEW)
MEA-CND(CAMERA2)
FINAL NUM. CALC
FINAL OUTPUT COND
=TO NEXT SUB-MENU ESC=BACK SEL=CHNG IMG TRG=POPUP
13-4
COLOR F C1 BRT
02 03 04 05 06 07 08 09 10 11 12 13 14 15
S
S
REG-COND (S)
REG-COND (E)
EVALUATION
NUM-CALC
OUT
1REGISTER NO.
2COLOR DETECT
3MEAS SHAPE (MDL 0)
4REFIMG ARE (MDL 0)
5SEARCH ARE (MDL 0)
6REFIMG(MDL 0)
7DTECT CRD(MDL 0)