9.5
Disassembly and Replacement
9.5.1
Bypass unit
(1)
Take off the ADU cover.
P.2-20 "2.5.7 ADU cover"
(2)
Remove 1 screw and take off the harness
cover.
(3)
Release the harness from the harness clamp
and disconnect 1 connectors.
(4)
Remove 2 screws, and take off the bypass
unit by lifting it up.
Note:
When installing the bypass unit, place the
guide behind the transfer unit.
e-STUDIO182/212/242
PAPER FEEDING SYSTEM
Guide
© 2009 TOSHIBA TEC CORPORATION All rights reserved
9 - 10
Screw
Harness cover
Fig. 9-6
Connector
Fig. 9-7
Screw
Screw
Bypass unit
Fig. 9-8