5.5
Disassembly and Replacement
5.5.1
Control panel unit
(1)
Remove 3 screws.
(2)
Take off the control panel unit while lifting it
up.
(3)
Disconnect 2 connector.
Note:
When installing the control panel unit, be
sure not to have the harness being caught by
the front right cover and the unit.
5.5.2
Control panel PC board (HPNL)
(1)
Take off the control panel unit.
P.5-7 "5.5.1 Control panel unit"
(2)
Remove 2 screws and take off the cover
while sliding it.
© 2009 TOSHIBA TEC CORPORATION All rights reserved
Fig. 5-6
Fig. 5-7
Fig. 5-8
5 - 7
Connector
Control panel unit
Cover
e-STUDIO182/212/242
CONTROL PANEL
5