9.5.2
Bypass tray
(1)
Take off the bypass unit.
P.9-10 "9.5.1 Bypass unit"
(2)
Release each latch to take off the front and
rear tray arms.
(3)
Take off the bypass tray.
9.5.3
Bypass separation pad
(1)
Take off the bypass unit.
P.9-10 "9.5.1 Bypass unit"
(2)
Remove 2 screws and take off the bypass
separation pad unit.
(3)
Remove 1 screw on the bottom of the bypass
separation pad unit, and take off the cover.
© 2009 TOSHIBA TEC CORPORATION All rights reserved
Latch
Fig. 9-9
Bypass separation pad unit
Fig. 9-10
Fig. 9-11
9 - 11
Bypass tray
Cover
e-STUDIO182/212/242
PAPER FEEDING SYSTEM
9